DIY SUCCESS - INSTALLING YOUR NEW SHOWER UNIT PROPERLY

DIY Success - Installing Your New Shower Unit Properly

DIY Success - Installing Your New Shower Unit Properly

Blog Article

Free Quote



On this page in the next paragraph you might get more worthwhile insights pertaining to How to Install a Direct-to-Stud Shower Enclosure.


How to Build a Shower Enclosure for Your DIY Bathroom
A successful shower setup needs mindful preparation and also a great deal of work. In many cases, you will need to do three kinds of jobs: mounting walls, mounting the plumbing, and finishing wall surfaces.

Prep work


Firstly, you must decide on the sort of shower that you desire to mount. It is important to ascertain whether the chosen shower is capable of dealing with certain systems and can regulate a safe level of water through the boiler. The majority of shower devices nowadays are created to be flexible to different water stress (such as saved warm water as well as chilly mains).
It is likewise essential to consider the water pressure and the preparation of the piping as well as water drainage for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be connected to the bath tap based on your need, and also the water temperature can be adjusted via the taps. Push-on mixers are cheap and incredibly easy to install. However, although the hose pipe connection is easy, it is easily dislodged. Additionally, it is inconvenient to adjust the temperature level.

  • Bath/Shower Mixer: The tube and also spray of this sort of shower are incorporated with a bathroom mixer faucet, as well as the temperature level can be changed with the bath taps. It is a really economical alternative and also no additional plumbing is included. Nonetheless, the bath/shower mixers additionally deal with bothersome temperature level control alternatives.

  • Guidebook Mixer: The tube as well as spray of a manual mixer shower unit are a part of the wall unit and the hot and cold water products are attached to a solitary shutoff The temperature as well as pressure of the water are regulated via either one or a range of knobs (in much more expensive showers). Although temperature control is much easier in hand-operated mixer kinds, they are a lot more costly than the previously discussed mixers. They additionally call for extra plumbing of hot and cold supply of water pipes.

  • Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall device and the cold and hot water materials are connected to a solitary valve below too. It is full with a built-in stabiliser to self-adjust the water temperature and also to prevent it from coming to be too warm. One of the largest advantages of a thermostatic mixer shower kind includes convenient temperature level control. However, it is one of the most expensive of the various mixer options.

  • Power Shower: A power shower is a solitary unit consisting of an effective electric pump that can altering both the water stress and temperature level. This type of shower can be fitted if there is water system from a cold water cistern as well as a hot water cylinder. A power shower makes the change of both pressure and also temperature simple. On the other hand, it disagrees for water warmed directly by the shower or where the water is supplied by a mix boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply as well as it warms the water electrically. It is very important to keep in mind that for this shower type to be mounted, the mains stress needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device allows the temperature level and stress to be adjusted by means of a handle. Designs with temperature level stabilisers are better as they continue to be untouched by other taps somewhere else in operation within the household. A significant drawback of electric showers is that the control handle only enables the alternative of high temperatures at much less pressure, or lower temperature levels at a greater pressure. This is bothersome in the winter season when the spray is commonly weak and also the mains water is colder. Nevertheless, this trouble is tackled in some versions which are available with a winter/summer setup.


  • Approach


    Depending on the kind of shower you desire to install, the shower head should either be suited order to prevent its contact with the water in the bath below or the base tray, or it needs to have a check shutoff.
    Before starting, it is a good idea to note the positions of the shower head and control, as well as to intend the pipe-work involved. Additionally, the drain system to eliminate the waste water will certainly need to be prepared. Both placements of the cable path and also the shower switch will additionally need to be thought about if an immediate or electrical shower unit is being set up.
    Make use of the instruction guide supplied with the shower unit to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is essential to remove the water supply. In order to safeguard the pipelines, they need to be given a waterproof covering and likewise fitted with isolating valves. The pipes can after that be hidden right into the wall and smudged over to neaten the overall look.
    Fit the base tray, shower head, and fittings.
    Link the main shower control to the pipes that will certainly be providing the water (This might call for a women screw string adapter).
    Reconnect the water system as well as test the pipelines for any type of leaks, as some may need tightening.
    If you are installing an electrical shower, bear in mind to turn off the power supply prior to making any type of electrical links. As soon as these links have been made (there ought to be assistance within the instruction manual), the power supply can be switched over back on.

    Changing Water Pressure to Suit Your Shower


    The cold water reservoir can be lifted to a greater elevation (in some cases as little as 150mm (6inches)) by installation a solid wooden support under it - perhaps composed of struts and blockboards. If you pick this alternative, the primary and circulation pipelines will also need to be increased to meet the brand-new elevation of the reservoir.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it must be attached into the power supply in order to run.

    Piping and Water drainage


    It is best to use 15mm size supply pipes, as well as make the runs to the shower as brief and straight as possible so regarding preserve optimal pressure and also minimise warm loss. In addition, by minimising using elbow joints for pipeline corners, you can reduce the resistance in the circulation of the water supply. You can accomplish this by flexing the pipes rather.

    Most Typical Blunders


  • Breaking or neglecting local code limitations.

  • Making use of pipes that are as well tiny.

  • Attaching copper to galvanized without utilizing a brass or dielectric suitable between both.

  • Not making use of tape or pipe compound at threaded joints.

  • Uneven your components when installing them.

  • Not setting up an air void filling for fixtures.

  • Cutting supply stub outs also brief to install the shutoff valves onto after the completed wall surface remains in place.

  • Not correctly straightening tubes right into fittings or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leakage.).

  • When transforming the water back on in your house, always run the outside hose pipe shutoff or purge your commodes to hemorrhage dirt and air from the lines. This debris can trigger troubles in your sink taps and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    Simple ways to Install a Shower Cubicle on Your Own

    Do you appreciate reading up on How to Install a Direct-to-Stud Shower Enclosure? Put a short review further down. We'd be delighted to hear your thoughts about this blog entry. We are looking forward that you visit us again later on. Enjoyed reading our blog? Please share it. Let others find it. Thank you for your time spent reading it.




    Book Today


    Report this page